Pro-Tek Frame Crash Protectors Sliders Made For 1998 1999 2000 2001 2002 2003 Suzuki TL-1000R TL1000R TL 1000 R TL-R

This Pro-tek frame slider kit is made from acetal plastic for strength and durability. It requires modifications to both fairings. It comes with all steel bolts, mounting hardware and complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims, steel bolts and two relocation brackets that clear the fairings by an inch.You do not want a slider to stick out too far causing a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 76mm (3") in length. The left side puck measures 95mm (3.75") in length. Both pucks are mounted to the brackets using 10mm x 50mm bolts.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications1998-2003 Suzuki TL-1000R DOES NOT FIT TL-SThe sliders are designed to fit specific engine mounts of your motorcycle. The left slider (longer puck) goes on the forward most engine mount bolt. The rear most engine mount is used for the right side (shorter puck). Install the bracket and rotate towards the top. Tighten to factory specs. DO NOT OVERTIGHTEN. Repeat process for both sides. This kit requires a hole to be cut on the left side only. The right will need a small notch. It is suggested that you drill a small pilot hole to locate the slider. Once you have found the center, use masking tape on the area to help protect from scratches or cracks when cutting. Use a hole saw cutter to cut a 2" hole in diameter on the left side. The edges can be filed for perfect fit.

• CNC machined from Acetal Plastic for strength and durability
• Frame Slider Kit requiring fairing modifications on both sides
• Designed to protect motorcycle frame and engine components
• Comes with two 10mm x 80mm steel bolts and two relocation brackets needed for installation
• Manufactured in The USA